When you remove a stump, a lot of time, there is a stump left, and stump removal, is not an easy job. One of the easy ways to get rid of the stump in no time is to burn it into ashes. However, before processing, it is better to consider the following things of the utmost importance. Or you can also hire reputable tree services for this purpose.

1.   Dry the stump first.

When the things are dried, it is much easier to get rid of them. Hence, if the stump is not dried correctly, you should wait before getting dried. Before you start the burn, you must call the local tree services to make sure that you are not breaking any of the rules about burning no matter where you are living. Moreover, if things are ok for stump removal, make sure to find nowhere any of the flammable materials to get something close to anything. 

2.   A chain saw. 

You must require the chain saw for cutting the X on the stump for stump removal in geelong. The broader and the deeper the X, the better it will be then for burning the stump for tree services. Fill the complete area with kerosene or gasoline; however, do not light it anymore. It would help if you gave things sometimes, which would then take several hours.

3.   Using more paper 

You can set the fire the following day by lighting some more paper and then tossing it on the top of the trench. Also, to make the burn more effective and then go faster, you can follow different paragraphs, but you can get the large metal barrel before you are on fire. How large of the stump removal you want to burn is entirely dependent on how large you need to burn the things. You can use the barrel over the entire sump after cutting the whole over the barrel. Then, toss the stuff on your log and put some more fuel on the good so it will start a fire. You can ask tree services for more assistance.

4.   Barrel for stump removal 

While using the barrel to stump removal, put some more logs in the fire once it is burning the good. The barrel will help you keep the higher temperature so that the stump will burn more efficiently while soaking in the fuel. Put in as many logs as you can, and then keep it burning until the stump removal is completed. If you want it to keep it burning to the next day, then you can also cut the other stump once it is finished. If you’re going to burn it on the next day, then you can also cut another X in the drill holes or the stump, pour more kerosene or gasoline on the stump, or then set it into the fire again. Or it is best to get assistance form tree services.